CUSTOM EZ ORDER SYSTEM II:

The main goal of Foot Function Lab begins by casting in a non-weight bearing subtalar neutral position. These orthtoics are used to balance the musculoskeletal system, control pronation or supination, support the mid metatarsal section, balance the forefoot, and relieve major foot problems such as Heel Spurs, Tendonitis, Fasciitis, etc...

The Custom Easy System is designed to offer a quick diagnosis and present a easy prescription to fit your patient's specific needs and lifestyle. An orthotic may be ordered in any length, form, etc. This allows for ordering the best design and materials to accurately fit and control the patient's foot. System II orthotics are 100% guaranteed to be custom made from each individual's impression, nothing comes off the shelf premade. Orthotics with no heel cups due to precise manufacturing, velcro is included with all models to maintain proper fit without heel cups. These orthotics are manufactured with a metatarsal bar that can be revised to any degree of forefoot control. Any accomodations will be made at no charge for lesions or other conditions that need relief from pain or pressure.

These orthotics are manufactured from a 1-inch and up foam impression box, a plaster cast, or our 3D Light Scanner. Easy System II made with heel cups are made the same as Easy System I.

EZ-1 Standard Spinal Orthotic

Available: Regular, 3/4", or Full Length, No Heel Cups, Deluxe Top Cover

Use: Designed for normal daily use, depending on length, in any dress shoe. Used to align the body from heel to toe and to control pronation or supination.

Structure: Manufactured on a flexible thin leather base, cushioned heel pad, with rubber longitudinal arch support, plastazote special beveled metatarsal bar, and standard tan deluxe top cover. And held in place with supplied Velcro® fasteners.

Note: Use regular length for dress shows, 3/4" length to protect the metatarsal heads when needed, and Full length to protect the toes for sport applications. 3/4" and Full length extensions have 1/8" Springlite padding under top cover to protect and accommodate metatarsals and toe pressure.
EZ-2 Ladies Dress Orthotic SH (Shock Heel)

Available: Regular, 3/4", or Full Length, No Heel Cups, Deluxe or 1/16" Pillow Top,

Use: Held with Velcro® fasteners, in all ladies flats, high heels, sling-backs, sandals, etc. Designed extra narrow to fit the modern contours of ladies dress shoes, is flared out between the 1st and 5th metatarsals for full balance, providing support of the arch, and control pronation or supination of the heel.

Structure: Manufactured on a flexible thin leather base, Deep heel seat of Shock Heel on reinforced base for positive control, with rubber longitudinal arch support, Plastazote special beveled metatarsal bar, and standard deluxe top cover or pillow top. And held in place with supplied Velcro® Fasteners.

Note: A. Regular length is for shoes that fit normally snug leaving no extra room under the metatarsal heads for padding. B. 3/4" Length adds 1/8" of an inch under metatarsal heads requiring shoes to be loose fitting.
EZ-3 Men's Dress Orthotic SH (Shock Heel)

Available: Regular or 3/4" Length, No Heel Cups, Deluxe or 1/16" Pillow Top

Use: Used in all men's dress shoes, loafers, casual, etc... Designed for the full width contour of men's shoes and is flared out between the 1st and 5th metatarsals for full balance, providing support of the arch, and control pronation or supination of the heel.

Structure: Manufactured on a flexible thin leather base, Deep heel seat of Shock Heel on reinforced base for positive control, with rubber longitudinal arch support, Plastazote special beveled metatarsal bar, and standard deluxe top cover or Pillow Top. And held in place with supplied Velcro® fasteners.

Note: A. Regular length is for shoes that fit normally snug leaving no extra room under the metatarsal heads for padding. B. 3/4" Length adds 1/8" of an inch under metatarsal heads requiring shoes to be loose fitting
EZ-4 Western Boot Orthotic SH (Shock Heel)

Available: Regular or 3/4 Length. No Heel Cups, Puff Top Cover

Use: For all western boots. Designed extra narrow between 1st and 5th metatarsal shafts to fit the contour of western boots, it is undercut beneath the arch area, and flared out between 1st and 5th metatarsal heads for full metatarsal control.

Structure: Manufactured on a flexible thin leather base, SH full heel for extra cushioning, with rubber longitudinal arc support, Plastazote special beveled metatarsal bar, and a Microcel Puff top cover for shock absorption and flexibility that won't bottom out. And held in place with supplied Velcro® fasteners.

Note: A. Regular length is for boots that fit normally snug leaving no extra room under the metatarsal heads for padding. B. 3/4 Length adds 1/8 of an inch under metatarsal heads requiring boots to be loose fitting
EZ-5 All Sports Orthotic

Available: 3/4" or Full Length, No Heel Cups, 1/8" Blue Pillow Top

Use: For occupational demanding extra cushioning or normal athletic activities. Golfing, Running, Walking, Soccer, Tennis, Skiing, Roller Blading, etc...

Structure: Manufactured on a flexible thin leather base, SH full heel for extra cushioning, with rubber longitudinal arch support, Plastazote special beveled metatarsal bar, and Deluxe or Pillow top over 1/16" Springlite heel padding. And held in place with supplied Velcro® fasteners.

Note: A. 3/4" and full length have extra 1/8" springlite padding added to protect metatarsal heads and toes. B. These orthotics must be used in sport shoes with removable inner soles.
EZ-6 High Stress Sports Orthotics

Available: Full Length only, No Heel Cups, with 1/8" Blue Pillow Top

Use: For high impact sports or when extra shock absorption is needed for the full plantar surface of the foot. Such as Aerobics, Basketball, Tennis, Running, Raquetball, etc...

Structure: Manufactured on a 1/8" Nickel-Plast base for double shock absorption, SH full heel for extra cushioning, with rubber longitudinal arch support, Plastazote special beveled metatarsal bar, and Pillow top cover. And held in place with supplied Velcro® fasteners.

Note: A. These orthotics must be used in sport shoes with removable inner soles.
EZ-7 Cushion Flex Geriatric Orthotic

Available: Full Length Only, No Heel Cups

Use: Full length orthotic designed for the 50+ age group that cannot tolerate a full control sports model. It's a lightweight long lasting cushioned orthotic with good support a flexibility. Good for walking and light sports activity.

Structure: Manufactured on a 1/8" Microcel Puff base for soft support, 1/8" Microcel Puff base for soft support, 1/8" beveled Puff heel support to correct pronation or supination, hand-made Puff longitudinal arch support, Plastazote special beveled metatarsal bar, and Puff top cover. And held in place with a supplied Velcro® fasteners.

Note: A. These orthotics must be used in sport shoes with removable inner soles.


The Custom Easy System II with Heel Cups is designed to offer a quick diagnosis and present an easy prescription to fit your patient’s specific needs and lifestyle. It also serves as an introduction towards custom ordering these orthotics. System I, raditionally podiatric type orthotics, involves a variety from soft to semi-flexible to rigid orthotics. These orthotics can be made from any 2-inch foam impression or from plaster cast and our 3D Light Scanner. Orthotics can be posted extrinsically or intrinsically according to the prescription. All Custom Easy System I orthotics offer a choice in top covers of either Gray Vinyl or Pillow Top. Pillow Top is an elastic nylon top cover over neoprene rubber that absorbs shock shearing.

EZ-15 Soft Support

Available: Met heads, 3/4”, Full Length, Gray Vinyl, or 1/8’ Pillow Top

Uses: Designed for the needs of a patient suffering from Diabetes or Osteo and Rheumatoid Arthritis. It adds cushioning to areas where fat pad has been lost, protects sensitive and insensitive feet, and accommodates lesions.

Structure: The shell is made of Plastozote (EVA) posted intrinsically from forefoot to rearfoot and underneath is covered in suede. Including heel cups to fit to cast.
EZ-16 Wonder Cork Orthotic

Available: Met heads, 3/4”, Full Length, Gray Vinyl, or 1/8’ Pillow Top

Uses: Lightweight orthotic for patients who require protection and relief from lesions and cannot tolerate any rigidity in an orthotic.

Structure: The shell is made of Light Cork posted intrinsically from forefoot to rearfoot bearing a neutral shell. Including standard deep heel cups to fit the cast.
EZ-18 Polyethylene (All Sport & Control)

Available: 3/4”, Full Length, Gray Vinyl, or 1/8’ Pillow Top

Uses: This is our most ordered, all around, orthotic for sports and foot control problems. It is most used for running, walking, tennis, etc... Also it is most used for controlling heel valgus and varus, Heel Spurs, Fasciitis, Tendonitis, Metatarsalgia, and Bunions.

Structure: The base shell is made out of 4.7 mm Polyethelene and is posted intrinsically in the forefoot and extrinsically in the rearfoot, it is covered on top with suede, and it has a standard half inch heel cup.
EZ-20 Polypropylene Orthotic

Available: Met heads, 3/4”, Full Length, Gray Vinyl, or 1/8’ Pillow Top

Uses: When a patient’s athletic activities involve high impact demand and a need for stability for side to side movements. This orthotic offers more control for sports such as Basketball, Racquetball, Tennis, etc...

Structure: The shell, with standard half inch heel cup, is made out of solid white deluxe satin finished polyopropylene and is posted intrinsically in the forefoot and extrinsically in the rearfoot with a post protector. With standard half-inch heel cups.